home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Amiga Plus 1995 #5 & #6
/
Amiga Plus CD - 1995 - No. 5 and 6.iso
/
pd
/
grafik
/
lightwave
/
lightwave-june95
/
000385_owner-lightwave@webcom.com_Fri Jun 23 18:28:35 1995.msg
< prev
next >
Wrap
Internet Message Format
|
1995-07-04
|
2KB
Received: by webcom.com
(1.37.109.15/16.2) id AA257097315; Fri, 23 Jun 1995 18:28:35 -0700
Return-Path: <owner-lightwave@webcom.com>
Received: from netcom19.netcom.com by webcom.com with ESMTP
(1.37.109.15/16.2) id AA257037310; Fri, 23 Jun 1995 18:28:30 -0700
Received: by netcom19.netcom.com (8.6.12/Netcom)
id SAA26958; Fri, 23 Jun 1995 18:31:46 -0700
Date: Fri, 23 Jun 1995 18:31:46 -0700 (PDT)
From: John Gross <jgross@netcom.com>
Subject: Re: Multiple Rail Extrude
To: Mike Crumpler <crumpms@mail.auburn.edu>
Cc: lightwave@webcom.com
In-Reply-To: <9506231529.AA13656@mallard.duc.auburn.edu>
Message-Id: <Pine.3.89.9506231823.A24924-0100000@netcom19>
Mime-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: owner-lightwave@webcom.com
Precedence: bulk
> I'm trying to use the multiple rail extrude function in modeler, but with
> very little success. I've read the manual but it doesn't give too much info
> on it. I can single rail extrude until the cows come home, but the multiple
> extrude has me baffled.
If you have access to LWPRO, the May 94 issue has a ReaderSpeak column
about rail extruding... The key things to look for are that the flat poly
you are going to extrude is aligned at the -start- of the rails (look for
the little diamond). Use the flip command if your rails aren't flipped right.
JG
--
John Gross <jgross@netcom.com> sent this message.
To Post a Message : lightwave@webcom.com
Un/Subscription Requests To : lightwave-request@webcom.com
(DIGEST) or : lightwave-digest-request@webcom.com
Administrative Items To : owner-lightwave@webcom.com